APPLICATIONS
CONTACT
Tel: +86 0757-82718907
E-mail: much6188@163.com
Address: No.11 North Ring Road, Luocun, Nanhai District, Foshan City, Guangdong Province, China
Ceramic bulletproof board industry
Dry pressing forming mold is used for one-way hydraulic press or two-way hydraulic press to form a mold by pressing ceramic, refractory or other metal powder with organic binder and moisture less than 8%. Dry pressing mold has simple mold and complex mold. According to the mold material, it is divided into steel mold and hard alloy mold. According to the size of the product, it can press one or more pieces at a time, and it can be divided into single-cavity mold and multi-cavity mold. According to the different pressed products, it can be directly called by the name of the formed products, such as lining brick mold, lattice brick mold, sagger mold, etc.
Ceramic Bulletproof Board Dry Bag Press
1. Structural Features This dry bag ceramic bulletproof plate press belongs to a special dry bag isostatic press. The main machine of the dry bag isostatic press adopts a prestressed steel wire winding working cylinder and a prestressed steel wire winding frame. The working mode adopts a mobile lower bearing platform, lower discharging, and is equipped with an automatic mold entry and exit device. The equipment is safe and convenient to operate. The pressing system of the dry bag ceramic bulletproof plate press adopts a hydraulic supercharger to pressurize and a polyurethane liner isolation way to pressurize. The dry bag ceramic bulletproof plate press machine adopts PLC control, touch screen setting, easy to operate. 2. Uses This dry bag ceramic bulletproof plate press is mainly used for direct forming of dry bag isostatic pressing powder of alumina, silicon carbide and boron carbide ceramic bulletproof plates or isostatic pressing treatment after preforming.
1. Features Integral cold isostatic press structure: steel wire winding working cylinder, laminated plate frame, working cylinder lifting type, upper discharge, medium does not overflow. Pressurization mode: high-pressure pump water pre-pressurization, hydraulic booster pressurization system. Working medium: anti-rust water-based fluid. 2. It is mainly used for isostatic pressing of smaller parts such as alumina, zirconia, silicon nitride, cemented carbide, rare earth permanent magnet materials, etc.
Four-column bidirectional special ceramic hydraulic press
This machine can achieve two-way simultaneous pressure, protection of the mould release, supporting the fabric and billet system, can achieve full-automatic pressing action.
CONTACT US
HOTLINE:
Tel: +86 0757-82718907
Add : No.11 North Ring Road, Luocun, Nanhai District, Foshan City, Guangdong Province, China
Email : much6188@163.com
WeChat QR Code
SEND A MESSAGE
Have questions or need more information?
SAF Coolest v1.3.1.2 设置面板 GAGSE-ZGYF-JDADE-ZEA
无数据提示
Sorry, the current section is being updated, so stay tuned!
You can view other sections or return to Home Page