APPLICATIONS
CONTACT
Tel: +86 0757-82718907
E-mail: much6188@163.com
Address: No.11 North Ring Road, Luocun, Nanhai District, Foshan City, Guangdong Province, China
Industry Center
Much mechanical compound hydraulic extruder is a combination of hydraulic extrusion granulator and hydraulic extrusion forming machine into one machine, and the granulated mud directly enters the barrel of the hydraulic extrusion forming machine in the vacuum chamber. The Much mechanical compound hydraulic extruder is especially suitable for the mud treatment of wet forming of special ceramics such as alumina and silicon carbide, and the moisture content of the mud can be as low as 13% ~ 15%. It is especially suitable for the extrusion of ceramic tubes and ceramic rollers, and can also be used for the extrusion of similar ceramic products.
hydraulic extrusion granulator
Much mechanical hydraulic extrusion granulator is designed as horizontal notch feeding, with vacuum box to vacuum mud. Much hydraulic extrusion granulator is especially suitable for alumina, silicon carbide and other special ceramics wet forming mud processing, mud moisture can be as low as 13% ~ 15%. It is mainly used for mud processing such as ceramic roller rods, generally through secondary granulation. It can also be used for extrusion molding of similar other ceramic products.
Polyurethane isostatic pressing mold
Polyurethane isostatic forming mold is used for wet bag isostatic press or dry bag isostatic press as a soft mold for transferring pressure, also known as envelope. It is a soft mold obtained by enlarging the size of the blank according to proportion, but it is relatively hard and has a certain supporting strength to be shaped. It can be filled with powder or sealed into the preformed blank and put into liquid for isostatic pressing, also known as wet bag isostatic pressing. It can also be made into a dry bag polyurethane isostatic pressing mold of suitable size for dry bag isostatic pressing.
Dry pressing forming mold is used for one-way hydraulic press or two-way hydraulic press to form a mold by pressing ceramic, refractory or other metal powder with organic binder and moisture less than 8%. Dry pressing mold has simple mold and complex mold. According to the mold material, it is divided into steel mold and hard alloy mold. According to the size of the product, it can press one or more pieces at a time, and it can be divided into single-cavity mold and multi-cavity mold. According to the different pressed products, it can be directly called by the name of the formed products, such as lining brick mold, lattice brick mold, sagger mold, etc.
Ceramic Bulletproof Board Dry Bag Press
1. Structural Features This dry bag ceramic bulletproof plate press belongs to a special dry bag isostatic press. The main machine of the dry bag isostatic press adopts a prestressed steel wire winding working cylinder and a prestressed steel wire winding frame. The working mode adopts a mobile lower bearing platform, lower discharging, and is equipped with an automatic mold entry and exit device. The equipment is safe and convenient to operate. The pressing system of the dry bag ceramic bulletproof plate press adopts a hydraulic supercharger to pressurize and a polyurethane liner isolation way to pressurize. The dry bag ceramic bulletproof plate press machine adopts PLC control, touch screen setting, easy to operate. 2. Uses This dry bag ceramic bulletproof plate press is mainly used for direct forming of dry bag isostatic pressing powder of alumina, silicon carbide and boron carbide ceramic bulletproof plates or isostatic pressing treatment after preforming.
The dry bag fire-resistant sagger press belongs to a special dry bag isostatic press. The main machine of the dry bag isostatic press adopts prestressed steel wire winding working cylinder and prestressed steel wire winding frame. The working mode adopts mobile lower bearing platform, lower discharging, and is equipped with automatic mold inlet and outlet device. The equipment is safe and convenient to operate.
1. Features Integral cold isostatic press structure: steel wire winding working cylinder, laminated plate frame, working cylinder lifting type, upper discharge, medium does not overflow. Pressurization mode: high-pressure pump water pre-pressurization, hydraulic booster pressurization system. Working medium: anti-rust water-based fluid. 2. It is mainly used for isostatic pressing of smaller parts such as alumina, zirconia, silicon nitride, cemented carbide, rare earth permanent magnet materials, etc.
CONTACT US
HOTLINE:
Tel: +86 0757-82718907
Add : No.11 North Ring Road, Luocun, Nanhai District, Foshan City, Guangdong Province, China
Email : much6188@163.com
WeChat QR Code
SEND A MESSAGE
Have questions or need more information?
SAF Coolest v1.3.1.2 设置面板 GAGSE-ZGYF-JDADE-ZEA
无数据提示
Sorry, the current section is being updated, so stay tuned!
You can view other sections or return to Home Page